#[doc = "Register `PROC1_INTE%s` reader"]
pub type R = crate::R<PROC1_INTE_SPEC>;
#[doc = "Register `PROC1_INTE%s` writer"]
pub type W = crate::W<PROC1_INTE_SPEC>;
#[doc = "Field `GPIO0_LEVEL_LOW` reader - "]
pub type GPIO0_LEVEL_LOW_R = crate::BitReader;
#[doc = "Field `GPIO0_LEVEL_LOW` writer - "]
pub type GPIO0_LEVEL_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO0_LEVEL_HIGH` reader - "]
pub type GPIO0_LEVEL_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO0_LEVEL_HIGH` writer - "]
pub type GPIO0_LEVEL_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO0_EDGE_LOW` reader - "]
pub type GPIO0_EDGE_LOW_R = crate::BitReader;
#[doc = "Field `GPIO0_EDGE_LOW` writer - "]
pub type GPIO0_EDGE_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO0_EDGE_HIGH` reader - "]
pub type GPIO0_EDGE_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO0_EDGE_HIGH` writer - "]
pub type GPIO0_EDGE_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO1_LEVEL_LOW` reader - "]
pub type GPIO1_LEVEL_LOW_R = crate::BitReader;
#[doc = "Field `GPIO1_LEVEL_LOW` writer - "]
pub type GPIO1_LEVEL_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO1_LEVEL_HIGH` reader - "]
pub type GPIO1_LEVEL_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO1_LEVEL_HIGH` writer - "]
pub type GPIO1_LEVEL_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO1_EDGE_LOW` reader - "]
pub type GPIO1_EDGE_LOW_R = crate::BitReader;
#[doc = "Field `GPIO1_EDGE_LOW` writer - "]
pub type GPIO1_EDGE_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO1_EDGE_HIGH` reader - "]
pub type GPIO1_EDGE_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO1_EDGE_HIGH` writer - "]
pub type GPIO1_EDGE_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO2_LEVEL_LOW` reader - "]
pub type GPIO2_LEVEL_LOW_R = crate::BitReader;
#[doc = "Field `GPIO2_LEVEL_LOW` writer - "]
pub type GPIO2_LEVEL_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO2_LEVEL_HIGH` reader - "]
pub type GPIO2_LEVEL_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO2_LEVEL_HIGH` writer - "]
pub type GPIO2_LEVEL_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO2_EDGE_LOW` reader - "]
pub type GPIO2_EDGE_LOW_R = crate::BitReader;
#[doc = "Field `GPIO2_EDGE_LOW` writer - "]
pub type GPIO2_EDGE_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO2_EDGE_HIGH` reader - "]
pub type GPIO2_EDGE_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO2_EDGE_HIGH` writer - "]
pub type GPIO2_EDGE_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO3_LEVEL_LOW` reader - "]
pub type GPIO3_LEVEL_LOW_R = crate::BitReader;
#[doc = "Field `GPIO3_LEVEL_LOW` writer - "]
pub type GPIO3_LEVEL_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO3_LEVEL_HIGH` reader - "]
pub type GPIO3_LEVEL_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO3_LEVEL_HIGH` writer - "]
pub type GPIO3_LEVEL_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO3_EDGE_LOW` reader - "]
pub type GPIO3_EDGE_LOW_R = crate::BitReader;
#[doc = "Field `GPIO3_EDGE_LOW` writer - "]
pub type GPIO3_EDGE_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO3_EDGE_HIGH` reader - "]
pub type GPIO3_EDGE_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO3_EDGE_HIGH` writer - "]
pub type GPIO3_EDGE_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO4_LEVEL_LOW` reader - "]
pub type GPIO4_LEVEL_LOW_R = crate::BitReader;
#[doc = "Field `GPIO4_LEVEL_LOW` writer - "]
pub type GPIO4_LEVEL_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO4_LEVEL_HIGH` reader - "]
pub type GPIO4_LEVEL_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO4_LEVEL_HIGH` writer - "]
pub type GPIO4_LEVEL_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO4_EDGE_LOW` reader - "]
pub type GPIO4_EDGE_LOW_R = crate::BitReader;
#[doc = "Field `GPIO4_EDGE_LOW` writer - "]
pub type GPIO4_EDGE_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO4_EDGE_HIGH` reader - "]
pub type GPIO4_EDGE_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO4_EDGE_HIGH` writer - "]
pub type GPIO4_EDGE_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO5_LEVEL_LOW` reader - "]
pub type GPIO5_LEVEL_LOW_R = crate::BitReader;
#[doc = "Field `GPIO5_LEVEL_LOW` writer - "]
pub type GPIO5_LEVEL_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO5_LEVEL_HIGH` reader - "]
pub type GPIO5_LEVEL_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO5_LEVEL_HIGH` writer - "]
pub type GPIO5_LEVEL_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO5_EDGE_LOW` reader - "]
pub type GPIO5_EDGE_LOW_R = crate::BitReader;
#[doc = "Field `GPIO5_EDGE_LOW` writer - "]
pub type GPIO5_EDGE_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO5_EDGE_HIGH` reader - "]
pub type GPIO5_EDGE_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO5_EDGE_HIGH` writer - "]
pub type GPIO5_EDGE_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO6_LEVEL_LOW` reader - "]
pub type GPIO6_LEVEL_LOW_R = crate::BitReader;
#[doc = "Field `GPIO6_LEVEL_LOW` writer - "]
pub type GPIO6_LEVEL_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO6_LEVEL_HIGH` reader - "]
pub type GPIO6_LEVEL_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO6_LEVEL_HIGH` writer - "]
pub type GPIO6_LEVEL_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO6_EDGE_LOW` reader - "]
pub type GPIO6_EDGE_LOW_R = crate::BitReader;
#[doc = "Field `GPIO6_EDGE_LOW` writer - "]
pub type GPIO6_EDGE_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO6_EDGE_HIGH` reader - "]
pub type GPIO6_EDGE_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO6_EDGE_HIGH` writer - "]
pub type GPIO6_EDGE_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO7_LEVEL_LOW` reader - "]
pub type GPIO7_LEVEL_LOW_R = crate::BitReader;
#[doc = "Field `GPIO7_LEVEL_LOW` writer - "]
pub type GPIO7_LEVEL_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO7_LEVEL_HIGH` reader - "]
pub type GPIO7_LEVEL_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO7_LEVEL_HIGH` writer - "]
pub type GPIO7_LEVEL_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO7_EDGE_LOW` reader - "]
pub type GPIO7_EDGE_LOW_R = crate::BitReader;
#[doc = "Field `GPIO7_EDGE_LOW` writer - "]
pub type GPIO7_EDGE_LOW_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO7_EDGE_HIGH` reader - "]
pub type GPIO7_EDGE_HIGH_R = crate::BitReader;
#[doc = "Field `GPIO7_EDGE_HIGH` writer - "]
pub type GPIO7_EDGE_HIGH_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bit 0"]
    #[inline(always)]
    pub fn gpio0_level_low(&self) -> GPIO0_LEVEL_LOW_R {
        GPIO0_LEVEL_LOW_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1"]
    #[inline(always)]
    pub fn gpio0_level_high(&self) -> GPIO0_LEVEL_HIGH_R {
        GPIO0_LEVEL_HIGH_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2"]
    #[inline(always)]
    pub fn gpio0_edge_low(&self) -> GPIO0_EDGE_LOW_R {
        GPIO0_EDGE_LOW_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3"]
    #[inline(always)]
    pub fn gpio0_edge_high(&self) -> GPIO0_EDGE_HIGH_R {
        GPIO0_EDGE_HIGH_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4"]
    #[inline(always)]
    pub fn gpio1_level_low(&self) -> GPIO1_LEVEL_LOW_R {
        GPIO1_LEVEL_LOW_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5"]
    #[inline(always)]
    pub fn gpio1_level_high(&self) -> GPIO1_LEVEL_HIGH_R {
        GPIO1_LEVEL_HIGH_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6"]
    #[inline(always)]
    pub fn gpio1_edge_low(&self) -> GPIO1_EDGE_LOW_R {
        GPIO1_EDGE_LOW_R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 7"]
    #[inline(always)]
    pub fn gpio1_edge_high(&self) -> GPIO1_EDGE_HIGH_R {
        GPIO1_EDGE_HIGH_R::new(((self.bits >> 7) & 1) != 0)
    }
    #[doc = "Bit 8"]
    #[inline(always)]
    pub fn gpio2_level_low(&self) -> GPIO2_LEVEL_LOW_R {
        GPIO2_LEVEL_LOW_R::new(((self.bits >> 8) & 1) != 0)
    }
    #[doc = "Bit 9"]
    #[inline(always)]
    pub fn gpio2_level_high(&self) -> GPIO2_LEVEL_HIGH_R {
        GPIO2_LEVEL_HIGH_R::new(((self.bits >> 9) & 1) != 0)
    }
    #[doc = "Bit 10"]
    #[inline(always)]
    pub fn gpio2_edge_low(&self) -> GPIO2_EDGE_LOW_R {
        GPIO2_EDGE_LOW_R::new(((self.bits >> 10) & 1) != 0)
    }
    #[doc = "Bit 11"]
    #[inline(always)]
    pub fn gpio2_edge_high(&self) -> GPIO2_EDGE_HIGH_R {
        GPIO2_EDGE_HIGH_R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bit 12"]
    #[inline(always)]
    pub fn gpio3_level_low(&self) -> GPIO3_LEVEL_LOW_R {
        GPIO3_LEVEL_LOW_R::new(((self.bits >> 12) & 1) != 0)
    }
    #[doc = "Bit 13"]
    #[inline(always)]
    pub fn gpio3_level_high(&self) -> GPIO3_LEVEL_HIGH_R {
        GPIO3_LEVEL_HIGH_R::new(((self.bits >> 13) & 1) != 0)
    }
    #[doc = "Bit 14"]
    #[inline(always)]
    pub fn gpio3_edge_low(&self) -> GPIO3_EDGE_LOW_R {
        GPIO3_EDGE_LOW_R::new(((self.bits >> 14) & 1) != 0)
    }
    #[doc = "Bit 15"]
    #[inline(always)]
    pub fn gpio3_edge_high(&self) -> GPIO3_EDGE_HIGH_R {
        GPIO3_EDGE_HIGH_R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 16"]
    #[inline(always)]
    pub fn gpio4_level_low(&self) -> GPIO4_LEVEL_LOW_R {
        GPIO4_LEVEL_LOW_R::new(((self.bits >> 16) & 1) != 0)
    }
    #[doc = "Bit 17"]
    #[inline(always)]
    pub fn gpio4_level_high(&self) -> GPIO4_LEVEL_HIGH_R {
        GPIO4_LEVEL_HIGH_R::new(((self.bits >> 17) & 1) != 0)
    }
    #[doc = "Bit 18"]
    #[inline(always)]
    pub fn gpio4_edge_low(&self) -> GPIO4_EDGE_LOW_R {
        GPIO4_EDGE_LOW_R::new(((self.bits >> 18) & 1) != 0)
    }
    #[doc = "Bit 19"]
    #[inline(always)]
    pub fn gpio4_edge_high(&self) -> GPIO4_EDGE_HIGH_R {
        GPIO4_EDGE_HIGH_R::new(((self.bits >> 19) & 1) != 0)
    }
    #[doc = "Bit 20"]
    #[inline(always)]
    pub fn gpio5_level_low(&self) -> GPIO5_LEVEL_LOW_R {
        GPIO5_LEVEL_LOW_R::new(((self.bits >> 20) & 1) != 0)
    }
    #[doc = "Bit 21"]
    #[inline(always)]
    pub fn gpio5_level_high(&self) -> GPIO5_LEVEL_HIGH_R {
        GPIO5_LEVEL_HIGH_R::new(((self.bits >> 21) & 1) != 0)
    }
    #[doc = "Bit 22"]
    #[inline(always)]
    pub fn gpio5_edge_low(&self) -> GPIO5_EDGE_LOW_R {
        GPIO5_EDGE_LOW_R::new(((self.bits >> 22) & 1) != 0)
    }
    #[doc = "Bit 23"]
    #[inline(always)]
    pub fn gpio5_edge_high(&self) -> GPIO5_EDGE_HIGH_R {
        GPIO5_EDGE_HIGH_R::new(((self.bits >> 23) & 1) != 0)
    }
    #[doc = "Bit 24"]
    #[inline(always)]
    pub fn gpio6_level_low(&self) -> GPIO6_LEVEL_LOW_R {
        GPIO6_LEVEL_LOW_R::new(((self.bits >> 24) & 1) != 0)
    }
    #[doc = "Bit 25"]
    #[inline(always)]
    pub fn gpio6_level_high(&self) -> GPIO6_LEVEL_HIGH_R {
        GPIO6_LEVEL_HIGH_R::new(((self.bits >> 25) & 1) != 0)
    }
    #[doc = "Bit 26"]
    #[inline(always)]
    pub fn gpio6_edge_low(&self) -> GPIO6_EDGE_LOW_R {
        GPIO6_EDGE_LOW_R::new(((self.bits >> 26) & 1) != 0)
    }
    #[doc = "Bit 27"]
    #[inline(always)]
    pub fn gpio6_edge_high(&self) -> GPIO6_EDGE_HIGH_R {
        GPIO6_EDGE_HIGH_R::new(((self.bits >> 27) & 1) != 0)
    }
    #[doc = "Bit 28"]
    #[inline(always)]
    pub fn gpio7_level_low(&self) -> GPIO7_LEVEL_LOW_R {
        GPIO7_LEVEL_LOW_R::new(((self.bits >> 28) & 1) != 0)
    }
    #[doc = "Bit 29"]
    #[inline(always)]
    pub fn gpio7_level_high(&self) -> GPIO7_LEVEL_HIGH_R {
        GPIO7_LEVEL_HIGH_R::new(((self.bits >> 29) & 1) != 0)
    }
    #[doc = "Bit 30"]
    #[inline(always)]
    pub fn gpio7_edge_low(&self) -> GPIO7_EDGE_LOW_R {
        GPIO7_EDGE_LOW_R::new(((self.bits >> 30) & 1) != 0)
    }
    #[doc = "Bit 31"]
    #[inline(always)]
    pub fn gpio7_edge_high(&self) -> GPIO7_EDGE_HIGH_R {
        GPIO7_EDGE_HIGH_R::new(((self.bits >> 31) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 0"]
    #[inline(always)]
    #[must_use]
    pub fn gpio0_level_low(&mut self) -> GPIO0_LEVEL_LOW_W<PROC1_INTE_SPEC> {
        GPIO0_LEVEL_LOW_W::new(self, 0)
    }
    #[doc = "Bit 1"]
    #[inline(always)]
    #[must_use]
    pub fn gpio0_level_high(&mut self) -> GPIO0_LEVEL_HIGH_W<PROC1_INTE_SPEC> {
        GPIO0_LEVEL_HIGH_W::new(self, 1)
    }
    #[doc = "Bit 2"]
    #[inline(always)]
    #[must_use]
    pub fn gpio0_edge_low(&mut self) -> GPIO0_EDGE_LOW_W<PROC1_INTE_SPEC> {
        GPIO0_EDGE_LOW_W::new(self, 2)
    }
    #[doc = "Bit 3"]
    #[inline(always)]
    #[must_use]
    pub fn gpio0_edge_high(&mut self) -> GPIO0_EDGE_HIGH_W<PROC1_INTE_SPEC> {
        GPIO0_EDGE_HIGH_W::new(self, 3)
    }
    #[doc = "Bit 4"]
    #[inline(always)]
    #[must_use]
    pub fn gpio1_level_low(&mut self) -> GPIO1_LEVEL_LOW_W<PROC1_INTE_SPEC> {
        GPIO1_LEVEL_LOW_W::new(self, 4)
    }
    #[doc = "Bit 5"]
    #[inline(always)]
    #[must_use]
    pub fn gpio1_level_high(&mut self) -> GPIO1_LEVEL_HIGH_W<PROC1_INTE_SPEC> {
        GPIO1_LEVEL_HIGH_W::new(self, 5)
    }
    #[doc = "Bit 6"]
    #[inline(always)]
    #[must_use]
    pub fn gpio1_edge_low(&mut self) -> GPIO1_EDGE_LOW_W<PROC1_INTE_SPEC> {
        GPIO1_EDGE_LOW_W::new(self, 6)
    }
    #[doc = "Bit 7"]
    #[inline(always)]
    #[must_use]
    pub fn gpio1_edge_high(&mut self) -> GPIO1_EDGE_HIGH_W<PROC1_INTE_SPEC> {
        GPIO1_EDGE_HIGH_W::new(self, 7)
    }
    #[doc = "Bit 8"]
    #[inline(always)]
    #[must_use]
    pub fn gpio2_level_low(&mut self) -> GPIO2_LEVEL_LOW_W<PROC1_INTE_SPEC> {
        GPIO2_LEVEL_LOW_W::new(self, 8)
    }
    #[doc = "Bit 9"]
    #[inline(always)]
    #[must_use]
    pub fn gpio2_level_high(&mut self) -> GPIO2_LEVEL_HIGH_W<PROC1_INTE_SPEC> {
        GPIO2_LEVEL_HIGH_W::new(self, 9)
    }
    #[doc = "Bit 10"]
    #[inline(always)]
    #[must_use]
    pub fn gpio2_edge_low(&mut self) -> GPIO2_EDGE_LOW_W<PROC1_INTE_SPEC> {
        GPIO2_EDGE_LOW_W::new(self, 10)
    }
    #[doc = "Bit 11"]
    #[inline(always)]
    #[must_use]
    pub fn gpio2_edge_high(&mut self) -> GPIO2_EDGE_HIGH_W<PROC1_INTE_SPEC> {
        GPIO2_EDGE_HIGH_W::new(self, 11)
    }
    #[doc = "Bit 12"]
    #[inline(always)]
    #[must_use]
    pub fn gpio3_level_low(&mut self) -> GPIO3_LEVEL_LOW_W<PROC1_INTE_SPEC> {
        GPIO3_LEVEL_LOW_W::new(self, 12)
    }
    #[doc = "Bit 13"]
    #[inline(always)]
    #[must_use]
    pub fn gpio3_level_high(&mut self) -> GPIO3_LEVEL_HIGH_W<PROC1_INTE_SPEC> {
        GPIO3_LEVEL_HIGH_W::new(self, 13)
    }
    #[doc = "Bit 14"]
    #[inline(always)]
    #[must_use]
    pub fn gpio3_edge_low(&mut self) -> GPIO3_EDGE_LOW_W<PROC1_INTE_SPEC> {
        GPIO3_EDGE_LOW_W::new(self, 14)
    }
    #[doc = "Bit 15"]
    #[inline(always)]
    #[must_use]
    pub fn gpio3_edge_high(&mut self) -> GPIO3_EDGE_HIGH_W<PROC1_INTE_SPEC> {
        GPIO3_EDGE_HIGH_W::new(self, 15)
    }
    #[doc = "Bit 16"]
    #[inline(always)]
    #[must_use]
    pub fn gpio4_level_low(&mut self) -> GPIO4_LEVEL_LOW_W<PROC1_INTE_SPEC> {
        GPIO4_LEVEL_LOW_W::new(self, 16)
    }
    #[doc = "Bit 17"]
    #[inline(always)]
    #[must_use]
    pub fn gpio4_level_high(&mut self) -> GPIO4_LEVEL_HIGH_W<PROC1_INTE_SPEC> {
        GPIO4_LEVEL_HIGH_W::new(self, 17)
    }
    #[doc = "Bit 18"]
    #[inline(always)]
    #[must_use]
    pub fn gpio4_edge_low(&mut self) -> GPIO4_EDGE_LOW_W<PROC1_INTE_SPEC> {
        GPIO4_EDGE_LOW_W::new(self, 18)
    }
    #[doc = "Bit 19"]
    #[inline(always)]
    #[must_use]
    pub fn gpio4_edge_high(&mut self) -> GPIO4_EDGE_HIGH_W<PROC1_INTE_SPEC> {
        GPIO4_EDGE_HIGH_W::new(self, 19)
    }
    #[doc = "Bit 20"]
    #[inline(always)]
    #[must_use]
    pub fn gpio5_level_low(&mut self) -> GPIO5_LEVEL_LOW_W<PROC1_INTE_SPEC> {
        GPIO5_LEVEL_LOW_W::new(self, 20)
    }
    #[doc = "Bit 21"]
    #[inline(always)]
    #[must_use]
    pub fn gpio5_level_high(&mut self) -> GPIO5_LEVEL_HIGH_W<PROC1_INTE_SPEC> {
        GPIO5_LEVEL_HIGH_W::new(self, 21)
    }
    #[doc = "Bit 22"]
    #[inline(always)]
    #[must_use]
    pub fn gpio5_edge_low(&mut self) -> GPIO5_EDGE_LOW_W<PROC1_INTE_SPEC> {
        GPIO5_EDGE_LOW_W::new(self, 22)
    }
    #[doc = "Bit 23"]
    #[inline(always)]
    #[must_use]
    pub fn gpio5_edge_high(&mut self) -> GPIO5_EDGE_HIGH_W<PROC1_INTE_SPEC> {
        GPIO5_EDGE_HIGH_W::new(self, 23)
    }
    #[doc = "Bit 24"]
    #[inline(always)]
    #[must_use]
    pub fn gpio6_level_low(&mut self) -> GPIO6_LEVEL_LOW_W<PROC1_INTE_SPEC> {
        GPIO6_LEVEL_LOW_W::new(self, 24)
    }
    #[doc = "Bit 25"]
    #[inline(always)]
    #[must_use]
    pub fn gpio6_level_high(&mut self) -> GPIO6_LEVEL_HIGH_W<PROC1_INTE_SPEC> {
        GPIO6_LEVEL_HIGH_W::new(self, 25)
    }
    #[doc = "Bit 26"]
    #[inline(always)]
    #[must_use]
    pub fn gpio6_edge_low(&mut self) -> GPIO6_EDGE_LOW_W<PROC1_INTE_SPEC> {
        GPIO6_EDGE_LOW_W::new(self, 26)
    }
    #[doc = "Bit 27"]
    #[inline(always)]
    #[must_use]
    pub fn gpio6_edge_high(&mut self) -> GPIO6_EDGE_HIGH_W<PROC1_INTE_SPEC> {
        GPIO6_EDGE_HIGH_W::new(self, 27)
    }
    #[doc = "Bit 28"]
    #[inline(always)]
    #[must_use]
    pub fn gpio7_level_low(&mut self) -> GPIO7_LEVEL_LOW_W<PROC1_INTE_SPEC> {
        GPIO7_LEVEL_LOW_W::new(self, 28)
    }
    #[doc = "Bit 29"]
    #[inline(always)]
    #[must_use]
    pub fn gpio7_level_high(&mut self) -> GPIO7_LEVEL_HIGH_W<PROC1_INTE_SPEC> {
        GPIO7_LEVEL_HIGH_W::new(self, 29)
    }
    #[doc = "Bit 30"]
    #[inline(always)]
    #[must_use]
    pub fn gpio7_edge_low(&mut self) -> GPIO7_EDGE_LOW_W<PROC1_INTE_SPEC> {
        GPIO7_EDGE_LOW_W::new(self, 30)
    }
    #[doc = "Bit 31"]
    #[inline(always)]
    #[must_use]
    pub fn gpio7_edge_high(&mut self) -> GPIO7_EDGE_HIGH_W<PROC1_INTE_SPEC> {
        GPIO7_EDGE_HIGH_W::new(self, 31)
    }
    #[doc = r" Writes raw bits to the register."]
    #[doc = r""]
    #[doc = r" # Safety"]
    #[doc = r""]
    #[doc = r" Passing incorrect value can cause undefined behaviour. See reference manual"]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.bits = bits;
        self
    }
}
#[doc = "Interrupt Enable for proc1  

You can [`read`](crate::generic::Reg::read) this register and get [`proc1_inte::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`proc1_inte::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct PROC1_INTE_SPEC;
impl crate::RegisterSpec for PROC1_INTE_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`proc1_inte::R`](R) reader structure"]
impl crate::Readable for PROC1_INTE_SPEC {}
#[doc = "`write(|w| ..)` method takes [`proc1_inte::W`](W) writer structure"]
impl crate::Writable for PROC1_INTE_SPEC {
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets PROC1_INTE%s to value 0"]
impl crate::Resettable for PROC1_INTE_SPEC {
    const RESET_VALUE: u32 = 0;
}