#[doc = r"Register block"]
#[repr(C)]
pub struct SM {
sm_clkdiv: SM_CLKDIV,
sm_execctrl: SM_EXECCTRL,
sm_shiftctrl: SM_SHIFTCTRL,
sm_addr: SM_ADDR,
sm_instr: SM_INSTR,
sm_pinctrl: SM_PINCTRL,
}
impl SM {
#[doc = "0x00 - Clock divisor register for state machine 0
Frequency = clock freq / (CLKDIV_INT + CLKDIV_FRAC / 256)"]
#[inline(always)]
pub const fn sm_clkdiv(&self) -> &SM_CLKDIV {
&self.sm_clkdiv
}
#[doc = "0x04 - Execution/behavioural settings for state machine 0"]
#[inline(always)]
pub const fn sm_execctrl(&self) -> &SM_EXECCTRL {
&self.sm_execctrl
}
#[doc = "0x08 - Control behaviour of the input/output shift registers for state machine 0"]
#[inline(always)]
pub const fn sm_shiftctrl(&self) -> &SM_SHIFTCTRL {
&self.sm_shiftctrl
}
#[doc = "0x0c - Current instruction address of state machine 0"]
#[inline(always)]
pub const fn sm_addr(&self) -> &SM_ADDR {
&self.sm_addr
}
#[doc = "0x10 - Read to see the instruction currently addressed by state machine 0's program counter
Write to execute an instruction immediately (including jumps) and then resume execution."]
#[inline(always)]
pub const fn sm_instr(&self) -> &SM_INSTR {
&self.sm_instr
}
#[doc = "0x14 - State machine pin control"]
#[inline(always)]
pub const fn sm_pinctrl(&self) -> &SM_PINCTRL {
&self.sm_pinctrl
}
}
#[doc = "SM_CLKDIV (rw) register accessor: Clock divisor register for state machine 0
Frequency = clock freq / (CLKDIV_INT + CLKDIV_FRAC / 256)
You can [`read`](crate::generic::Reg::read) this register and get [`sm_clkdiv::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sm_clkdiv::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).
For information about available fields see [`mod@sm_clkdiv`]
module"]
pub type SM_CLKDIV = crate::Reg<sm_clkdiv::SM_CLKDIV_SPEC>;
#[doc = "Clock divisor register for state machine 0
Frequency = clock freq / (CLKDIV_INT + CLKDIV_FRAC / 256)"]
pub mod sm_clkdiv;
#[doc = "SM_EXECCTRL (rw) register accessor: Execution/behavioural settings for state machine 0
You can [`read`](crate::generic::Reg::read) this register and get [`sm_execctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sm_execctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).
For information about available fields see [`mod@sm_execctrl`]
module"]
pub type SM_EXECCTRL = crate::Reg<sm_execctrl::SM_EXECCTRL_SPEC>;
#[doc = "Execution/behavioural settings for state machine 0"]
pub mod sm_execctrl;
#[doc = "SM_SHIFTCTRL (rw) register accessor: Control behaviour of the input/output shift registers for state machine 0
You can [`read`](crate::generic::Reg::read) this register and get [`sm_shiftctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sm_shiftctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).
For information about available fields see [`mod@sm_shiftctrl`]
module"]
pub type SM_SHIFTCTRL = crate::Reg<sm_shiftctrl::SM_SHIFTCTRL_SPEC>;
#[doc = "Control behaviour of the input/output shift registers for state machine 0"]
pub mod sm_shiftctrl;
#[doc = "SM_ADDR (r) register accessor: Current instruction address of state machine 0
You can [`read`](crate::generic::Reg::read) this register and get [`sm_addr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).
For information about available fields see [`mod@sm_addr`]
module"]
pub type SM_ADDR = crate::Reg<sm_addr::SM_ADDR_SPEC>;
#[doc = "Current instruction address of state machine 0"]
pub mod sm_addr;
#[doc = "SM_INSTR (rw) register accessor: Read to see the instruction currently addressed by state machine 0's program counter
Write to execute an instruction immediately (including jumps) and then resume execution.
You can [`read`](crate::generic::Reg::read) this register and get [`sm_instr::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sm_instr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).
For information about available fields see [`mod@sm_instr`]
module"]
pub type SM_INSTR = crate::Reg<sm_instr::SM_INSTR_SPEC>;
#[doc = "Read to see the instruction currently addressed by state machine 0's program counter
Write to execute an instruction immediately (including jumps) and then resume execution."]
pub mod sm_instr;
#[doc = "SM_PINCTRL (rw) register accessor: State machine pin control
You can [`read`](crate::generic::Reg::read) this register and get [`sm_pinctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sm_pinctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).
For information about available fields see [`mod@sm_pinctrl`]
module"]
pub type SM_PINCTRL = crate::Reg<sm_pinctrl::SM_PINCTRL_SPEC>;
#[doc = "State machine pin control"]
pub mod sm_pinctrl;