Module rp2040_pac::ppb::nvic_iser

source ·
Expand description

Use the Interrupt Set-Enable Register to enable interrupts and determine which interrupts are currently enabled.
If a pending interrupt is enabled, the NVIC activates the interrupt based on its priority. If an interrupt is not enabled, asserting its interrupt signal changes the interrupt state to pending, but the NVIC never activates the interrupt, regardless of its priority.

Structs§

  • NVIC_ISER_SPEC
    Use the Interrupt Set-Enable Register to enable interrupts and determine which interrupts are currently enabled.
    If a pending interrupt is enabled, the NVIC activates the interrupt based on its priority. If an interrupt is not enabled, asserting its interrupt signal changes the interrupt state to pending, but the NVIC never activates the interrupt, regardless of its priority.

Type Aliases§

  • R
    Register NVIC_ISER reader
  • SETENA_R
    Field SETENA reader - Interrupt set-enable bits.
    Write:
    0 = No effect.
    1 = Enable interrupt.
    Read:
    0 = Interrupt disabled.
    1 = Interrupt enabled.
  • SETENA_W
    Field SETENA writer - Interrupt set-enable bits.
    Write:
    0 = No effect.
    1 = Enable interrupt.
    Read:
    0 = Interrupt disabled.
    1 = Interrupt enabled.
  • W
    Register NVIC_ISER writer