Type Alias rp2040_pac::i2c0::ic_ss_scl_lcnt::W

pub type W = W<IC_SS_SCL_LCNT_SPEC>;

Register IC_SS_SCL_LCNT writer

Aliased Type

struct W { /* private fields */ }

Implementations

impl W

pub fn ic_ss_scl_lcnt(&mut self) -> IC_SS_SCL_LCNT_W<'_, IC_SS_SCL_LCNT_SPEC>

Bits 0:15 - This register must be set before any I2C bus transaction can take place to ensure proper I/O timing. This register sets the SCL clock low period count for standard speed. For more information, refer to ‘IC_CLK Frequency Configuration’

This register can be written only when the I2C interface is disabled which corresponds to the IC_ENABLE[0] register being set to 0. Writes at other times have no effect.

The minimum valid value is 8; hardware prevents values less than this being written, and if attempted, results in 8 being set. For designs with APB_DATA_WIDTH = 8, the order of programming is important to ensure the correct operation of DW_apb_i2c. The lower byte must be programmed first, and then the upper byte is programmed.

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Safety

Passing incorrect value can cause undefined behaviour. See reference manual