Enum rp2040_pac::i2c0::ic_con::SPEED_A

#[repr(u8)]
pub enum SPEED_A {
    STANDARD = 1,
    FAST = 2,
    HIGH = 3,
}

These bits control at which speed the DW_apb_i2c operates; its setting is relevant only if one is operating the DW_apb_i2c in master mode. Hardware protects against illegal values being programmed by software. These bits must be programmed appropriately for slave mode also, as it is used to capture correct value of spike filter as per the speed mode.

This register should be programmed only with a value in the range of 1 to IC_MAX_SPEED_MODE; otherwise, hardware updates this register with the value of IC_MAX_SPEED_MODE.

1: standard mode (100 kbit/s)

2: fast mode (<=400 kbit/s) or fast mode plus (<=1000Kbit/s)

3: high speed mode (3.4 Mbit/s)

Note: This field is not applicable when IC_ULTRA_FAST_MODE=1

Value on reset: 2

Variants

STANDARD = 1

1: Standard Speed mode of operation

FAST = 2

2: Fast or Fast Plus mode of operation

HIGH = 3

3: High Speed mode of operation

Trait Implementations

impl Clone for SPEED_A

fn clone(&self) -> SPEED_A

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SPEED_A

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl FieldSpec for SPEED_A

type Ux = u8

Raw field type (u8, u16, u32, …).

impl From<SPEED_A> for u8

fn from(variant: SPEED_A) -> Self

Converts to this type from the input type.

impl PartialEq for SPEED_A

fn eq(&self, other: &SPEED_A) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for SPEED_A

impl Eq for SPEED_A

impl StructuralPartialEq for SPEED_A