Module OTGSC

On-The-Go Status & control

Modules

ASV

A Session Valid - Read Only. Indicates VBus is above the A session valid threshold.

ASVIE

A Session Valid Interrupt Enable - Read/Write

ASVIS

A Session Valid Interrupt Status - Read/Write to Clear

AVV

A VBus Valid - Read Only. Indicates VBus is above the A VBus valid threshold.

AVVIE

A VBus Valid Interrupt Enable - Read/Write. Setting this bit enables the A VBus valid interrupt.

AVVIS

A VBus Valid Interrupt Status - Read/Write to Clear

BSE

B Session End - Read Only. Indicates VBus is below the B session end threshold.

BSEIE

B Session End Interrupt Enable - Read/Write. Setting this bit enables the B session end interrupt.

BSEIS

B Session End Interrupt Status - Read/Write to Clear

BSV

B Session Valid - Read Only. Indicates VBus is above the B session valid threshold.

BSVIE

B Session Valid Interrupt Enable - Read/Write

BSVIS

B Session Valid Interrupt Status - Read/Write to Clear

DP

Data Pulsing - Read/Write

DPIE

Data Pulse Interrupt Enable

DPIS

Data Pulse Interrupt Status - Read/Write to Clear

DPS

Data Bus Pulsing Status - Read Only

EN_1MS

1 millisecond timer Interrupt Enable - Read/Write

ID

USB ID - Read Only. 0 = A device, 1 = B device

IDIE

USB ID Interrupt Enable - Read/Write. Setting this bit enables the USB ID interrupt.

IDIS

USB ID Interrupt Status - Read/Write

IDPU

ID Pullup - Read/Write This bit provide control over the ID pull-up resistor; 0 = off, 1 = on [default]

OT

OTG Termination - Read/Write

STATUS_1MS

1 millisecond timer Interrupt Status - Read/Write to Clear

TOG_1MS

1 millisecond timer toggle - Read Only. This bit toggles once per millisecond.

VC

VBUS Charge - Read/Write

VD

VBUS_Discharge - Read/Write. Setting this bit causes VBus to discharge through a resistor.