Module rp2040_pac::usbctrl_regs::ep_stall_arm

Device: this bit must be set in conjunction with the STALL bit in the buffer control register to send a STALL on EP0. The device controller clears these bits when a SETUP packet is received because the USB spec requires that a STALL condition is cleared when a SETUP packet is received.

Structs

• EP_STALL_ARM_SPEC
  Device: this bit must be set in conjunction with the STALL bit in the buffer control register to send a STALL on EP0. The device controller clears these bits when a SETUP packet is received because the USB spec requires that a STALL condition is cleared when a SETUP packet is received.

Type Aliases

• EP0_IN_R
  Field EP0_IN reader -
• EP0_IN_W
  Field EP0_IN writer -
• EP0_OUT_R
  Field EP0_OUT reader -
• EP0_OUT_W
  Field EP0_OUT writer -
• R
  Register EP_STALL_ARM reader
• W
  Register EP_STALL_ARM writer