Field BUFFER_ADDRESS reader - 64 byte aligned buffer address for this EP (bits 0-5 are ignored). Relative to the start of the DPRAM.
Field BUFFER_ADDRESS writer - 64 byte aligned buffer address for this EP (bits 0-5 are ignored). Relative to the start of the DPRAM.
Field DOUBLE_BUFFERED reader - This endpoint is double buffered.
Field DOUBLE_BUFFERED writer - This endpoint is double buffered.
Field ENABLE reader - Enable this endpoint. The device will not reply to any packets for this endpoint if this bit is not set.
Field ENABLE writer - Enable this endpoint. The device will not reply to any packets for this endpoint if this bit is not set.
Field ENDPOINT_TYPE reader -
Field ENDPOINT_TYPE writer -
Field HOST_POLL_INTERVAL reader - The interval the host controller should poll this endpoint. Only applicable for interrupt endpoints. Specified in ms - 1. For example: a value of 9 would poll the endpoint every 10ms.
Field HOST_POLL_INTERVAL writer - The interval the host controller should poll this endpoint. Only applicable for interrupt endpoints. Specified in ms - 1. For example: a value of 9 would poll the endpoint every 10ms.
Field INTERRUPT_ON_NAK reader - Trigger an interrupt if a NAK is sent. Intended for debug only.
Field INTERRUPT_ON_NAK writer - Trigger an interrupt if a NAK is sent. Intended for debug only.
Field INTERRUPT_ON_STALL reader - Trigger an interrupt if a STALL is sent. Intended for debug only.
Field INTERRUPT_ON_STALL writer - Trigger an interrupt if a STALL is sent. Intended for debug only.
Field INTERRUPT_PER_BUFF reader - Trigger an interrupt each time a buffer is done.
Field INTERRUPT_PER_BUFF writer - Trigger an interrupt each time a buffer is done.
Field INTERRUPT_PER_DOUBLE_BUFF reader - Trigger an interrupt each time both buffers are done. Only valid in double buffered mode.
Field INTERRUPT_PER_DOUBLE_BUFF writer - Trigger an interrupt each time both buffers are done. Only valid in double buffered mode.
Register EP_CONTROL%s reader
Register EP_CONTROL%s writer