Module rp2040_pac::clocks::clk_gpout2_ctrl

Clock control, can be changed on-the-fly (except for auxsrc)

Structs

• CLK_GPOUT2_CTRL_SPEC
  Clock control, can be changed on-the-fly (except for auxsrc)

Enums

• AUXSRC_A
  Selects the auxiliary clock source, will glitch when switching

Type Aliases

• AUXSRC_R
  Field AUXSRC reader - Selects the auxiliary clock source, will glitch when switching
• AUXSRC_W
  Field AUXSRC writer - Selects the auxiliary clock source, will glitch when switching
• DC50_R
  Field DC50 reader - Enables duty cycle correction for odd divisors
• DC50_W
  Field DC50 writer - Enables duty cycle correction for odd divisors
• ENABLE_R
  Field ENABLE reader - Starts and stops the clock generator cleanly
• ENABLE_W
  Field ENABLE writer - Starts and stops the clock generator cleanly
• KILL_R
  Field KILL reader - Asynchronously kills the clock generator
• KILL_W
  Field KILL writer - Asynchronously kills the clock generator
• NUDGE_R
  Field NUDGE reader - An edge on this signal shifts the phase of the output by 1 cycle of the input clock
  This can be done at any time
• NUDGE_W
  Field NUDGE writer - An edge on this signal shifts the phase of the output by 1 cycle of the input clock
  This can be done at any time
• PHASE_R
  Field PHASE reader - This delays the enable signal by up to 3 cycles of the input clock
  This must be set before the clock is enabled to have any effect
• PHASE_W
  Field PHASE writer - This delays the enable signal by up to 3 cycles of the input clock
  This must be set before the clock is enabled to have any effect
• R
  Register CLK_GPOUT2_CTRL reader
• W
  Register CLK_GPOUT2_CTRL writer