Struct nrf52840_pac::ppi::chenset::R

pub struct R(/* private fields */);

Register CHENSET reader

Implementations

impl R

pub fn ch0(&self) -> CH0_R

Bit 0 - Channel 0 enable set register. Writing ‘0’ has no effect

pub fn ch1(&self) -> CH1_R

Bit 1 - Channel 1 enable set register. Writing ‘0’ has no effect

pub fn ch2(&self) -> CH2_R

Bit 2 - Channel 2 enable set register. Writing ‘0’ has no effect

pub fn ch3(&self) -> CH3_R

Bit 3 - Channel 3 enable set register. Writing ‘0’ has no effect

pub fn ch4(&self) -> CH4_R

Bit 4 - Channel 4 enable set register. Writing ‘0’ has no effect

pub fn ch5(&self) -> CH5_R

Bit 5 - Channel 5 enable set register. Writing ‘0’ has no effect

pub fn ch6(&self) -> CH6_R

Bit 6 - Channel 6 enable set register. Writing ‘0’ has no effect

pub fn ch7(&self) -> CH7_R

Bit 7 - Channel 7 enable set register. Writing ‘0’ has no effect

pub fn ch8(&self) -> CH8_R

Bit 8 - Channel 8 enable set register. Writing ‘0’ has no effect

pub fn ch9(&self) -> CH9_R

Bit 9 - Channel 9 enable set register. Writing ‘0’ has no effect

pub fn ch10(&self) -> CH10_R

Bit 10 - Channel 10 enable set register. Writing ‘0’ has no effect

pub fn ch11(&self) -> CH11_R

Bit 11 - Channel 11 enable set register. Writing ‘0’ has no effect

pub fn ch12(&self) -> CH12_R

Bit 12 - Channel 12 enable set register. Writing ‘0’ has no effect

pub fn ch13(&self) -> CH13_R

Bit 13 - Channel 13 enable set register. Writing ‘0’ has no effect

pub fn ch14(&self) -> CH14_R

Bit 14 - Channel 14 enable set register. Writing ‘0’ has no effect

pub fn ch15(&self) -> CH15_R

Bit 15 - Channel 15 enable set register. Writing ‘0’ has no effect

pub fn ch16(&self) -> CH16_R

Bit 16 - Channel 16 enable set register. Writing ‘0’ has no effect

pub fn ch17(&self) -> CH17_R

Bit 17 - Channel 17 enable set register. Writing ‘0’ has no effect

pub fn ch18(&self) -> CH18_R

Bit 18 - Channel 18 enable set register. Writing ‘0’ has no effect

pub fn ch19(&self) -> CH19_R

Bit 19 - Channel 19 enable set register. Writing ‘0’ has no effect

pub fn ch20(&self) -> CH20_R

Bit 20 - Channel 20 enable set register. Writing ‘0’ has no effect

pub fn ch21(&self) -> CH21_R

Bit 21 - Channel 21 enable set register. Writing ‘0’ has no effect

pub fn ch22(&self) -> CH22_R

Bit 22 - Channel 22 enable set register. Writing ‘0’ has no effect

pub fn ch23(&self) -> CH23_R

Bit 23 - Channel 23 enable set register. Writing ‘0’ has no effect

pub fn ch24(&self) -> CH24_R

Bit 24 - Channel 24 enable set register. Writing ‘0’ has no effect

pub fn ch25(&self) -> CH25_R

Bit 25 - Channel 25 enable set register. Writing ‘0’ has no effect

pub fn ch26(&self) -> CH26_R

Bit 26 - Channel 26 enable set register. Writing ‘0’ has no effect

pub fn ch27(&self) -> CH27_R

Bit 27 - Channel 27 enable set register. Writing ‘0’ has no effect

pub fn ch28(&self) -> CH28_R

Bit 28 - Channel 28 enable set register. Writing ‘0’ has no effect

pub fn ch29(&self) -> CH29_R

Bit 29 - Channel 29 enable set register. Writing ‘0’ has no effect

pub fn ch30(&self) -> CH30_R

Bit 30 - Channel 30 enable set register. Writing ‘0’ has no effect

pub fn ch31(&self) -> CH31_R

Bit 31 - Channel 31 enable set register. Writing ‘0’ has no effect

Methods from Deref<Target = R<CHENSET_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<CHENSET_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<CHENSET_SPEC>> for R

fn from(reader: R<CHENSET_SPEC>) -> Self

Converts to this type from the input type.