Module MISC0_SET

Miscellaneous Register 0

Modules

CLKGATE_CTRL

This bit allows disabling the clock gate (always ungated) for the xtal 24MHz clock that clocks the digital logic in the analog block

CLKGATE_DELAY

This field specifies the delay between powering up the XTAL 24MHz clock and releasing the clock to the digital logic inside the analog block

DISCON_HIGH_SNVS

This bit controls a switch from VDD_HIGH_IN to VDD_SNVS_IN.

OSC_I

This field determines the bias current in the 24MHz oscillator

OSC_XTALOK

Status bit that signals that the output of the 24-MHz crystal oscillator is stable

OSC_XTALOK_EN

This bit enables the detector that signals when the 24MHz crystal oscillator is stable

REFTOP_LOWPOWER

Control bit to enable the low-power mode in the analog bandgap.

REFTOP_PWD

Control bit to power-down the analog bandgap reference circuitry

REFTOP_PWDVBGUP

Control bit to power down the VBG-up detection circuitry in the analog bandgap.

REFTOP_SELFBIASOFF

Control bit to disable the self-bias circuit in the analog bandgap

REFTOP_VBGADJ

no description available

REFTOP_VBGUP

Status bit that signals the analog bandgap voltage is up and stable. 1 - Stable.

RTC_XTAL_SOURCE

This field indicates which chip source is being used for the rtc clock.

STOP_MODE_CONFIG

Configure the analog behavior in stop mode.

XTAL_24M_PWD

This field powers down the 24M crystal oscillator if set true.