Expand description
EPx Control (Host-mode only!)
Structs§
- EPX_
CONTROL_ SPEC - EPx Control (Host-mode only!)
Enums§
- ENDPOINT_
TYPE_ A - Value on reset: 0
Type Aliases§
- BUFFER_
ADDRESS_ R - Field
BUFFER_ADDRESSreader - 64 byte aligned buffer address for this EP (bits 0-5 are ignored). Relative to the start of the DPRAM. - BUFFER_
ADDRESS_ W - Field
BUFFER_ADDRESSwriter - 64 byte aligned buffer address for this EP (bits 0-5 are ignored). Relative to the start of the DPRAM. - DOUBLE_
BUFFERED_ R - Field
DOUBLE_BUFFEREDreader - This endpoint is double buffered. - DOUBLE_
BUFFERED_ W - Field
DOUBLE_BUFFEREDwriter - This endpoint is double buffered. - ENABLE_
R - Field
ENABLEreader - Enable this endpoint. The device will not reply to any packets for this endpoint if this bit is not set. - ENABLE_
W - Field
ENABLEwriter - Enable this endpoint. The device will not reply to any packets for this endpoint if this bit is not set. - ENDPOINT_
TYPE_ R - Field
ENDPOINT_TYPEreader - - ENDPOINT_
TYPE_ W - Field
ENDPOINT_TYPEwriter - - INTERRUPT_
ON_ NAK_ R - Field
INTERRUPT_ON_NAKreader - Trigger an interrupt if a NAK is sent. Intended for debug only. - INTERRUPT_
ON_ NAK_ W - Field
INTERRUPT_ON_NAKwriter - Trigger an interrupt if a NAK is sent. Intended for debug only. - INTERRUPT_
ON_ STALL_ R - Field
INTERRUPT_ON_STALLreader - Trigger an interrupt if a STALL is sent. Intended for debug only. - INTERRUPT_
ON_ STALL_ W - Field
INTERRUPT_ON_STALLwriter - Trigger an interrupt if a STALL is sent. Intended for debug only. - INTERRUPT_
PER_ BUFF_ R - Field
INTERRUPT_PER_BUFFreader - Trigger an interrupt each time a buffer is done. - INTERRUPT_
PER_ BUFF_ W - Field
INTERRUPT_PER_BUFFwriter - Trigger an interrupt each time a buffer is done. - INTERRUPT_
PER_ DOUBLE_ BUFF_ R - Field
INTERRUPT_PER_DOUBLE_BUFFreader - Trigger an interrupt each time both buffers are done. Only valid in double buffered mode. - INTERRUPT_
PER_ DOUBLE_ BUFF_ W - Field
INTERRUPT_PER_DOUBLE_BUFFwriter - Trigger an interrupt each time both buffers are done. Only valid in double buffered mode. - R
- Register
EPX_CONTROLreader - W
- Register
EPX_CONTROLwriter