Module nrf52840_pac::power::pofcon

Power-fail comparator configuration

Structs

• POFCON_SPEC
  Power-fail comparator configuration
• R
  Register POFCON reader
• W
  Register POFCON writer

Enums

• POF_A
  Enable or disable power failure warning
• THRESHOLDVDDH_A
  Power-fail comparator threshold setting for high voltage mode (supply connected to VDDH only). This setting does not apply for normal voltage mode (supply connected to both VDD and VDDH).
• THRESHOLD_A
  Power-fail comparator threshold setting. This setting applies both for normal voltage mode (supply connected to both VDD and VDDH) and high voltage mode (supply connected to VDDH only). Values 0-3 set threshold below 1.7 V and should not be used as brown out detection will be activated before power failure warning on such low voltages.

Type Aliases

• POF_R
  Field POF reader - Enable or disable power failure warning
• POF_W
  Field POF writer - Enable or disable power failure warning
• THRESHOLDVDDH_R
  Field THRESHOLDVDDH reader - Power-fail comparator threshold setting for high voltage mode (supply connected to VDDH only). This setting does not apply for normal voltage mode (supply connected to both VDD and VDDH).
• THRESHOLDVDDH_W
  Field THRESHOLDVDDH writer - Power-fail comparator threshold setting for high voltage mode (supply connected to VDDH only). This setting does not apply for normal voltage mode (supply connected to both VDD and VDDH).
• THRESHOLD_R
  Field THRESHOLD reader - Power-fail comparator threshold setting. This setting applies both for normal voltage mode (supply connected to both VDD and VDDH) and high voltage mode (supply connected to VDDH only). Values 0-3 set threshold below 1.7 V and should not be used as brown out detection will be activated before power failure warning on such low voltages.
• THRESHOLD_W
  Field THRESHOLD writer - Power-fail comparator threshold setting. This setting applies both for normal voltage mode (supply connected to both VDD and VDDH) and high voltage mode (supply connected to VDDH only). Values 0-3 set threshold below 1.7 V and should not be used as brown out detection will be activated before power failure warning on such low voltages.